Powerline Communication Adapter(PLC)
- Home
- >
- Products
- >
- Home Network Adapter
- >
- Powerline Communication Adapter(PLC)

Powerline Communication Adapter(PLC)
Brand :hkt
Product origin :china
Delivery time :30D
Supply capacity :10K
This power line Mini wall mount adapter can provide the transmission of broadband data service over power line and every power socket can become a networking connection, which is suitable for use in a wide range of both residential (in-home) and commercial (offices, apartments, hotels, warehouses) network applications in which existing power lines can be utilized. There is never any need to install new wires.
These adapters enable the effortless creation of a high-speed network that supports video, voice and data.
200Mbps Power Line Communication
Model No.:HP200
Powerline Communication Adapter(PLC) Introduction
This 200M Wallmount/Pass-through PLC adapter can provide the transmission of broadband data service via power line,which are suitable for use in a wide range of both residential (in-home) and commercial (offices,apartments, hotels, warehouses) network applications in which existing power lines can be utilized.
There is never any need to install new wires.
These adapters enable the effortless creation of a high-speed network that supports video, voice and data.
� Wallmount type and power voltage range of 85 to 265 VAC 50/60Hz
� HomePlug AV compliant, Co-existence with HomePlug 1.0 Nodes
� Support QAM 1024 /256 / 64 / 16 / 8, QPSK, BPSK, and ROBO modulation schemes
� Up to 200 Mbps data rate on the power line.
� 128-bit AES Link Encryption with key management for secure power line communications
� Windowed OFDM with noise mitigation based on patented line synchronization echniques
improves data integrity in noisy conditions
� Dynamic channel adaptation and channel estimation maximizes throughput in harsh channel
conditions
� TDMA and priority-based CSMA/CA channel access schemes maximize efficiency and
throughput
� Integrated Quality of Service (QoS) Enhancements: contention-free access, our-level priority
based contention access, and multi segment bursting
� ToS and CoS Packet Classifiers
� Supports IGMP managed multicast sessions
Application
� High Definition (HD) and Standard Definition (SD) video distribution
� Higher data rate broadband sharing for power line LAN
� Shared broadband internet access
� TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
Parameter Specification
System SPEC | |
Chipset | Intellon INT6400 |
SDRAM | 128bits |
Serial Flash | 16Mbits |
Firmware | Support North America/Europe/APAC/Japan |
Feature and Technology SPEC | |
Protocol | HomePlug AV 1.0 EEE802.3 10/100 Ethernet(100Mbps) EEE802.3u Fast Ethernet Co-exists with existed HomePlug1.0 |
System Support | Windows 98SE, 2000, ME, XP 32/64 bit ,Vista 32/64bit,Windows7 32/64bit |
PLC Rate | 200Mb |
Data Rate- TCP/UDP | 65Mbps TCP 90Mbps UDP |
Modulation Band | 2-30MHz |
Modulation Schemes | Supports256/64/16/8-QAM, QPSK,BPSK and ROBO |
Encryption | 128 AES |
QoS | Support contention-free access, four-level priority based contention access, and multi segment bursting Support VLAN Priority Support ToS and CoS Packet Classifier |
Work Mode | TDMA and priority based CSMA/CA |
Multicast Support | Supports IGMP managed multicast sessions |
IPv6 | Support |
SNMPv2 or v3 | Support |
Typical Coverage | Up to 5000 square foot home The actual Coverage will vary with the power grid and the number Of PLC terminal device. |
LED’s | Power Ethernet: Ethernet Link and Activity Data: PLC Link and Activity |
Push Button | RESET:Restore the default factory parameter NMKSET:Set up network password automatically |
Power Socket | Support British, Euro, Japan, US and China power connector |
Ethernet Interface | 1 x RJ45 for 10/100 Ethernet (Auto MDI/MDI-X) |
Consumption | 4.0W |
Environment Requirement | |
Operating Temperature | 0º to 45º C |
Storage Temperature | -20 º to 70 º C |
Operating Humidity | 10% to 90% Non-condensing |
Storage Humidity | 5% to 90% Non-Condensing |
Input Rating | 100-240 VAC, 50/60Hz |
EMC and Safety | |
Regulatory Compliance | FCC Part 15 Class B CE |
Safety Regulations | UL |
Green Standard | RoHS |
Physical Dimension | |
Physical Characteristics | L×W×H: 100mm*70mm*40mm |
Weight | 100g |
Wireless 200Mbps Powerline Adapter
Model No.: HP200W
Description
This 200Mbps powerline wallmount adapter is a
802.11n Extender for transmitting data up to 200Mbit/s
Across the household power line, and for wireless the
Transmitting rate can up to 150Mbit/s, and every power
socket becomes a 11n connection. As an advantage, the
combination of the two technologies, homeplug AV and
802.11n. even complicated corner that used to be
Unreachable with wiring is now able to go online
Conveniently, which is suitable for use in a wide range of
Both residential (in home) and commercial (offices, apart
ments, hotels, warehouses) network applications. No cables
, no drilling. These adapters enable the effortless creation of high-speed network that supports video, voice and data.
Powerline Features
Ø Power voltage range of 100 to 240VAC 50/60Hz
Ø HomePlug AV compliant and Co-existence with HomePlug 1.0 Nodes
Ø Up to 200Mbps phy rate
Ø Support QAM 1024/256/64/16/8,QPDK, BPSK and ROBO
modulation schemes
Ø 128-bit AES link encryption
Ø Dynamic channel adaptation and channel estimation maximizes throughput in harsh channel conditions
Ø TDMA and priority-based CSMA/CA channel access schemes maximize efficiency and throughput
Ø Integrated quality of service (QoS) Enhancements
Ø Supports IGMP managed multicast sessions
Wireless Features
Ø IEEE 802.11b/g/n compliant
Ø Wireless 11n Up to 150 Mbps phyrate
Ø Support 802.11n 1T1R MAC/BBP w/ MLD improvement
Ø Multiple BSSID (up to 8)
Ø Support 128-Bit and 64-Bit WEP encryption , 802.1x, WPA, WPA2 and WPS
Ø Support RJ45x1
Application
Ø High Definition (HD) and Standard Definition (SD) video distribution
Ø Higher data rate broadband sharing for power line LAN
Ø Shared broadband internet access
Ø TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
Ø Backbone for wireless and wireless extender
Parameter Specification
System Specification | |
Chipset | AR6400 |
SDRAM | 128bits |
Serial Flash | 16Mbits |
Firmware | Support North America/Europe/APAC/Japan |
Feature and Technology SPEC | |
Protocol | HomePlug AV,Co-exists with existing HomePlug 1.0 IEEE 802.3 10/100Mbps Ethernet IEEE802.3u Fast Ethernet |
PLC Rate | 200Mbps |
Data Rate- TCP/UDP | 65Mbps TCP 90Mbps UDP |
Modulation Band | 2-30MHz |
Modulation Schemes | Supports 1024/256/64/16/8-QAM, QPSK,BPSK and ROBO |
Encryption | 128bit AES |
QoS | Support contention-free access, four-level priority based Contention access, and multi segment bursting Support VLAN priority Support ToS and CoS packet classifier |
Work Mode | TDMA and priority based CSMA/CA |
Multicast Support | Supports IGMP managed multicast sessions |
WiFi Module SPEC | |
Chipset | Ralink RT3050 |
Protocol | IEEE 802.11b/g/n |
Wireless Rate | 11n: Up to 150Mbps 11g: Up to 54Mbps 11b: Up to 11Mbps |
Wireless Frequency Range | 2.4GHz to 2.484GHz |
Modulation Type | For 802.11b (DSSS) For 802.11g (OFDM) For 802.11n (OFDM) |
Multi-BSSID | Up to 8 BSSIDs |
Work Mode | 1Tx/Rx |
Security | WPA,WPA2,64/128/152-bit WEP,SSID hide, MAC Address Access Control List |
QoS | Support WMM, WMM-PS, MAC filter, Broadcast storm control and traffic control |
System SPEC | |
System Support | Windows 98SE,2000, ME, XP ,Vista ,Windows7 |
LED’s | Power/run: double color PLC: double color, indicator PLC Link and Activity WLAN: indicator Wireless Link and Activity WPS: indicator the status of WPS Authenticator LAN: indicator the Ethernet Link and Activity |
Button | Reset: Restore the default factory settings or reset system NMK: use to synchronized network password in PLC WPS: use to authenticated for wireless provide service |
Power Socket | Support British, Euro, Japan, US and China power connector |
Ethernet Interface | 1 x RJ45 for 10/100Mbps Ethernet (Auto MDI/MDI-X) |
Software Update | Support software update from WEB |
Consumption | 7W(typical) |
Environment Requirement | |
Operating Temperature | 0º to 40º C |
Storage Temperature | -20 º to 70 º C |
Operating Humidity | 10% to 85% Non-condensing |
Storage Humidity | 5% to 90% Non-Condensing |
Input Rating | 100-240 VAC, 50/60Hz |
Physical Dimension | |
Physical Characteristics | L×W×H: 105mm*60mm*45mm |
Weight | 160g |
500Mbps Powerline Communication
Model No.: HP500
Description
This 500Mbps power line Mini wall mount adapter can provide the transmission of broadband data service over power line and every power socket can become a networking connection, which is suitable for use in a wide range of both residential (in-home) and commercial (offices, apartments, hotels, warehouses) network applications in which existing power lines can be utilized. There is never any need to install new wires.
These adapters enable the effortless creation of a high-speed network that supports video, voice and data.
Features
l Wall mount type and power voltage range of 100 to 240 VAC 50/60Hz
l IEEE1901 and Home Plug AV compliant, Co-existence with Home Plug 1.0 Nodes
l Support QAM 4096/1024/256/64/16/8, QPSK, BPSK, and ROBO modulation schemes
l 128-bit AES link encryption with key management for secure power line communications
l Windowed OFDM with noise mitigation based on patented line synchronization techniques improves data integrity in noisy conditions
l Dynamic channel adaptation and channel estimation maximizes throughput in harsh channel conditions
l TDMA and priority-based CSMA/CA channel access schemes maximize efficiency and throughput
l PLC up to 500Mbps data rate on the power line
l Integrated quality of service (QoS) Enhancements
l Supports IGMP managed multicast sessions
Application
High Definition (HD) and Standard Definition (SD) video distribution
Higher data rate broadband sharing for power line LAN
Shared broadband internet access
TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
500Mbps Wireless PLC adapter
Model No.: HP500W
Description
Up to 500Mbps, 300 Meters ,300Mbps Wireless N Rate
Wireless Powerline Extender HP500W extends the Internet connection to every room connected to a home’s circuitry. All devices in the room have two options to get access to HP500W, whether through wireless or using an Ethernet cable. With 500Mbps Powerline link rate and 300Mbps wireless N rate, it is ideal for bandwidth consuming or latency sensitive applications like video streaming, online gaming and Internet calls. With HP500W, Internet can now truly be available everywhere in your home or office.
With advanced HomePlug AV technology, HP500W provides users with stable, high-speed data transfer rates of up to 500Mbps on a circuit length of up to 300 meters. Together with its built-in Qos and powerful AES encryption, the HP500W is a great choice for a whole home solution to connect all network compatible devices--from computers and game consoles, to set-top boxes for IPTV, printers and NAS.With wireless speeds of up to 300Mbps, users can effortlessly extend their networks via their home’s existing electrical circuitry and broadcast a wireless signal to another area of their home or office
Features
HomePlug AV standard compliant, high-speed data transfer rate of up to 500Mbps, ideal for HD video or 3D video streaming and online gaming
300Mbps wireless rate
Up to 300 meter range over a home's electrical circuit for better performance through walls or across floors
Plug and Play, no new wires or configuration required,using the existing electrical wire
Easily connect and secure your network with push button security (“Pair” button, “WPS” button)
Built-in QoS assures the quality of bandwidth sensitive applications such as voice, video and online games
Supports IGMP managed multicast IP transmission, optimizes IPTV streaming
Application
Ø High Definition (HD) and Standard Definition (SD) video distribution
Ø Higher data rate broadband sharing for power line LAN
Ø Shared broadband internet access
Ø TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
Specs
SYSTEM SPECS | |
Chipset | Atheros AR7420/AR1540 |
SDRAM | 256bits |
Serial Flash | 64Mbits |
Firmware | Support US,EU,UK,Japan |
TECHNICAL SPECS | |
Standards and Protocols | HomePlug AV IEEE 802.3 /802.3u |
System Requirements | Windows 98SE, 2000, ME, XP, Vista ,7 |
PLC Data Rate | 500Mbps |
TCP/UDP | 95Mbps TCP 95Mbps UDP |
Modulation frequency band | 2-67.5MHz |
Modulation schemes | Support 1024/256/64/16/8-QAM, QPSK,BPSK and ROBO |
Encryption | 128bit AES |
QoS | Support ToS and CoS |
Work mode | CSMA/CA |
Multicast support | Support IGMP |
WiFi Module SPEC | |
Chipset | AR9341 |
Standards and Protocols | IEEE 802.11b/g/n |
Data rate | 11n: Up to 300 Mbps in 40MHz mode Up to 150 Mbps in 20MHz mode 11g: Up to 54Mbps 11b: Up to 11Mbps |
Wireless Frequency Range | 2.4GHz to 2.484GHz |
Modulation Type | For 802.11b (DSSS) For 802.11g (OFDM) For 802.11n (OFDM) |
Frequency band | Up to 8 BSSIDs |
Modulation technology | For 802.11b (DSSS) For 802.11g (OFDM) For 802.11n (OFDM) |
Safty | WPA,WPA2,64/128/152-bit WEP,SSID hide, MAC Address Access Control List |
Multi-BSSID | Up to 8 BSSID |
Work mode | Router/AP |
Systems requirements | Windows 98SE,2000, ME, XP ,Vista ,Windows7 |
IPv6 | Support |
LED’s | Power PLC WLAN LAN1-LAN2 |
Plug type | CN\EU\US\UK |
Interface | 2*10/100Mbps Ethernet Port |
Button | Reset Security WPS |
System upgrade | Support |
Power consumption | 7W(typical) |
Environment requirements | |
Operating Temperature | 0º to 60º C |
Storage Temperature | -20 º to 70 º C |
Operating Humidity | 10% to 90%RH |
Storage Humidity | 5% to 90% RH |
Input rating | 100-240 VAC, 50/60Hz |
Physical dimension | |
Physical size | L×W×H: 107mm*62mm*48.5mm |
weight | 145g |